Login

Register

Login

Register

Welcome Guest
Welcome Guest

Fixed Addressable Carbon Dioxide Detector 0-5000ppm (T625-LCO2)

Sending
User Review
4 (2 votes)

£456.55£501.89 Exc VAT

Clear
  • Industry first 1 click automatic setup
  • Can be supplied pre-wired using M16 Sockets or wiring needed
  • Standard 2 gang pattress mount
  • RS485 Sentinel™ Programming
  • Dado mount or Wall mount
  • Pre-calibrated
  • In-service Calibration possible
  • Replaceable sensor fronts
  • Manufactured exclusively in the UK

Product Description

Fixed Addressable Carbon Dioxide Detector

The Addressable T625-CO2 Carbon Dioxide Detector is used to monitor for increased levels of CO2. Our Carbon Dioxide Detectors have seen use in many applications; ranging from laboratories, School craft rooms, refrigeration detection and fizzy drink factories. Our addressable Carbon Dioxide detectors have also been used with CO2 fire equidistant systems.

Advantages of IGD Sensor Technology:

T625 MICRO systems and sensors require no setup, with just 1 click of the button the controller will find and automatically setup all the alarm levels for the connected sensors. This means that you do not need any prior knowledge in gas detection experience to install and setup the system. Wiring is made simple and cost effective, as the sensors are connected on one single cable run. Furthermore, if you do not have any electrical knowledge the system can be supplied in a “plug & play” format, using pre-made cables. This allows you to deploy the system quickly and effectively, as no wiring is needed.

Sensor Technology:

IGD’s range of Infra-Red Carbon Dioxide detectors cover detection capability from low ppm to 100% volume concentrations. The detectors use the latest dual wavelength infra-red spectrometry techniques to ensure high specificity to CO2, excluding other interfering gases which could cause false alarms. The detectors combine IGD’s Copyrighted software algorithms and latest ARM processor technology into a detector with exceptional performance characteristics.

  • Highly specific to Carbon Dioxide
  • Unaffected by gas concentration
  • High reliability
  • Fail-safe operation
  • Continuous monitoring of high gas readings without affecting the sensor
  • Full temperature compensation

Alarm Levels:

Low Range Carbon Dioxide Detector 0-5000ppm:

Alarm Level 1 – 1500ppm 

Alarm Level 2 – 5000ppm

Type – Rising – Latching Alarms

 

Systems Accessories:

IGD supply a range of accessories for your gas detection system including:

Bump Test Kits. – this allows you to test your system periodically, allowing you to check the system is fully functional and your cause and effects.

Splash Guards. –  Splash guards protect sensors, which are placed at low levels, from both rain water and splashes, including cleaning fluids.

Beacon Sounders/Audible Visual Alarms. – are be fitted to our system easily using our Nodes, it will automatically find them. Supplying the system with a visual alarm indicator.

Annual Service of the System:

Any gas detection system must be service every 6 months under both the PUWER Act and BS EN 60079-29-2. All IGD equipment must be service by certified IGD engineers (They will be carrying IGD Certified cards or phone IGD for assistance). We can offer a tailored service contracts to meet your needs.

Product Specification

T90 Response & Accuracy: <15s & +/-2% of Range

Power: 18-28V DC 

Outputs: RS485 Sentinel™ Programming 

Protection: IP54

Operating temperature: -5 to 55°C

Operating humidity: 5-95% RH Non-condensing

Cell Type and Life: Infra-Red & 5 Years (dependant on environment) 

Weight: 425g

Range: 0-5000ppm

Downloads

You may also like…