1-8 Channel 1 Click Auto Setup Gas Detection Panel 24V
User Review( votes)
£234.69 – £290.82 Exc VAT
With just 1 click of the button, the 625 MICRO addressable gas detection system will automatically find and setup alarm levels for any connected sensor. The system can be supplied with pre-made cables. Allowing anyone to deploy an advanced gas detection system, quickly and effectively with no prior knowledge needed. This also means you will not need a commissioning engineer, further saving you costs.
1-8 channels detection system.
Please note this is the control panel and sensors are required. Also note cables and power supply sold separately.
1 Click Auto Setup Gas Detection Panel 24V (1-8 Channels)
The T625 MICRO gas detection panel is a fast, effective gas detection system, ideal for small applications. As a result, with the revolutionary 1 click auto setup feature, you can now deploy a small gas detection system with no prior knowledge of gas detection.
With just 1 click the T625 MICRO will automatically find any detectors on the highway (cable run) and will then set the alarm levels and output values. The controller is fully addressable, allowing you to interface the system into a site wide BMS or Fire System etc. By adding an addressable I/O node you also allow the gas detection controller to control third party devices such as solenoid shut off valves, beacon sounders or ventilation systems etc. Giving you added flexibility in site safety.
Gas detector options:
- Flammable Gases 0-100%
- Carbon Monoxide 0-100ppm
- Chlorine 0-5ppm
- Carbon Dioxide 0-5000ppm
- Carbon Dioxide 0-5%
- Oxygen 0-25%
- Hydrogen Sulphide 0-50ppm
- Addressable I/O Node (an addressable interface for third party devices)
Example Applications Where the MICRO is Ideal:
- Boiler Room
- Swimming Pool/Spa Pool/Hotel Pool
- Pub cellars
- Bottle storage
- School class rooms/laboratories
Furthermore, all gas detection systems must be calibrated every 6 months under BS EN 60079-29-2:2015 and the PUWER Act. Here at IGD we recommend that only IGD trained engineers should service our systems, please see the below link for who our trained partner engineers are, or ask your client to see the proof in the form of there IGD approved engineer card or email [email protected] if you have an questions.
**Please note cables and Power supply unit sold separately.
- 1-6 Detectors
- 1-2 Nodes or I/O points
- 1 Click Auto Setup Function
- optional pre-made cables
- Sentinel™ addressable communication
- RS485 ports
- 230V (note power supply sold separately)
- 2 Lines x 8 Digit LCD Display
- Multi-colour backlight (Red = Alarm, Yellow = Fault, Blue = Normal)
- 2 off SPCO Relays 4A non-inductive, User Configurable
- 3 off 4-20mA linear outputs, user configurable
- Sounder 80dB at 100mm (Mutable)
- RS485 port Modbus
- 8 off Addressable series detectors or I/O modules
- -5 to 55 Degree C
- 0-95% RH Non-condensing
- Wall Mount